MAM
Biomass, Coal Combustion and Gasification Laboratory
About Us
Biomass, Coal Combustion and Gasification LaboratorySince 2005, the laboratory has been operating as part of a pioneering research group conducting applied and multidisciplinary R&D studies in the field of energy technologies. The laboratory focuses on thermochemical conversion of hydrocarbon resources such as biomass and coal, producing heat, electricity, synthetic fuels and chemicals through combustion, gasification, pyrolysis and reforming technologies. It has expertise in synthesis gas production and conditioning, carbon capture (oxidation, chemical cycle combustion) and conversion (CCU), catalyst development, process simulation and reactor design. It is also supported by a comprehensive analytical infrastructure for characterization of raw materials, catalysts and products (char, ash, tar, gas) including short analysis, calorific value determination, elemental analysis, ash melting temperature, inorganic content determination (XRF, ICP-OES), pressurized TGA-MS and TGA-FTIR, gas and pyrolysis liquid analysis by GC-MS, BET surface area and pore structure, particle size distribution and true density measurements. The laboratory makes strong contributions to national and international R&D projects with both laboratory-scale and pilot-scale system installations.
Our Capabilities / Competencies
- Thermochemical conversion of hydrocarbon resources to produce heat, electricity, liquid fuels and chemicals
- Biomass treatment and preparation
- Incineration, Gasification, Pyrolysis, Reforming Technologies
- Gas cleaning and conditioning technologies
- Fuel/chemical (Fischer Tropsch fuel, methane, methanol, olefins, dimethylether, hydrogen, etc.) production technologies from syngas
- Synthetic fuel optimization technologies
- Carbon Dioxide Capture, Separation and Conversion Technologies (CCU)
- Catalyst development, characterization and testing and reactor technologies
- Process simulation, modeling and design
- Field engineering studies
- Physical and chemical characterization of solid (coal, biomass, char, ash), liquid (tar, bio-oil) and gaseous fuels (flue gas, syngas, pyrolysis gas)
- Laboratory-scale to pilot-scale system design and installation
Pilot Plant and Laboratory Scale Systems
Laboratory Scale Systems
- 40 kWth Fixed Bed Gasification and Gas Cleaning System
- 20 kWth Fluidized Bed Gasification System
- 30 kWth Circulating Fluidized Bed Combustion System
- 30 kWth 5 bar Pressure Bubbling Fluidized Bed Combustion System
- 20 kWth Entrained-Bed Gasification System
Fixed Bed Pyrolysis System (100gr)
Rotary Type Pyrolysis System (1 kg)
Laboratory Scale CO2 Capture System (L=15 l/h G=720 l/h)
System Images
Pilot Scale Systems
Entrained Flow Gasification System (2-4 kg/h)
30 kWth Fluidized Bed Gasification System
- 750 kWth Circulating Fluidized Bed Combustion System
Rotary Type Pyrolysis System
- Fixed Bed Pyrolysis System
- 100 kWth Hydrogen Production System from Biomass
- Pilot Scale CO2Capture System (L=1.5 m3/h G=18 Nm3/h)
System Images
Demonstration (Technology Demonstration) Systems
1.1 MWth 12 bar Bubbling Fluidized Bed Gasification and Gas Cleaning
- 1.5 MWth Atmospheric Drift Flow Gasification and Gas Cleaning
System Images
Fuel Preparation Systems
- 50 kg/h feed capacity Biomass pelletizing system
- 50 kg/h feed capacity Biomass accumulation system
- 10 kg/h feed capacity Biomass dryer
Characterization of feedstock, catalyst and products (slurry, ash, tar, gas)
- Brief analysis (moisture, volatile matter, ash, fixed carbon)
- Determination of calorific value (Upper calorific value, lower calorific value)
- Elemental analysis (Carbon, hydrogen, nitrogen, sulfur)
- Ash melting temperature determination
- Determination of Inorganic Content (XRF, ICP-OES devices)
- Analysis with pressurized TGA-MS, TGA-FTIR devices
- Detailed gas and pyrolysis liquid analysis by GCMS
- Surface area and pore diameter (BET) determination
- Determination of particle size distribution
- Actual density determination
- Hardgrove grindability determination
Simulation Infrastructure
- Aspen HYSYS
- Aspen Plus
- AutoCAD
- AutoCAD Plant 3D
- ANSYS Fluent
- Star-CCM+
- Star-CD
- VVD
- Minitab