MATERIAL

Articles

Exciton Photoluminescence, Photoconductivity and Absorption in GaSe₀.₉Te₀.₁ Alloys Crystals

Year of Publication: 2009
Author: Mamedov, G.M.
Other Authors: Karabulut, M., Ertap, H., Kodolbaş, A.O., Öktü, Ö., Bacıoğlu, A.
Published at: Journal of Luminescence, 129, 226-230
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Negative Capacitance Peculiarities in a-Si:H/c-Si Rectifier Structure

Year of Publication: 2010
Author: Kavasoglu, A.S.
Other Authors: Kavasoglu, N., Kodolbas, A.O., Birgi, O., Öktü, Ö., Oktik, S.
Published at: Microelectronic Engineering, 87, 108-116
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Temperature Dependent Photoluminescence of PECVD a-SiOx:H (x<2)

Year of Publication: 2010
Author: Bacioglu, A.
Other Authors: Kodolbas, A.O., Öktü, Ö.
Published at: Journal of Luminescence, 30, 1730-1737
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Electrical Characterization of a-Si:H(n)/c-Si(p) Structure

Year of Publication: 2011
Author: Kavasoglu, S.
Other Authors: Birgi, Ö., Kavasoğlu, N., Oylumoğlu, G., Kodolbaş, A.O., Kangı, R., Yılmaz, O.
Published at: Journal of Alloys and Compounds, 509, 9394-9398
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Consensus Stability Testing Protocols for Organic Photovoltaic Materials and Devices

Year of Publication: 2011
Author: Reese, M.O.
Other Authors: Gevorgyan, S.A., Jørgensen, M., Bundgaard, E., Kurtz, S.R., Ginley, D.S., ... Uzunoglu, G.Y.
Published at: Solar Energy Materials and Solar Cells, 95, 1253
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

The ISOS-3 Inter-laboratory Collaboration Focused on the Stability of a Variety of Organic Photovoltaic Devices

Year of Publication: 2012
Author: Tanenbaum, D.M.
Other Authors: Hermenau, M., Voroshazi, E., Llyou, M.T., Galagan, Y., ... Uzunoglu, G.Y.
Published at: RSC Advances, 2, 882-893
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Investigation of the Degradation Mechanisms of a Variety of Organic Photovoltaic Devices by Combination of Imaging Techniques-The ISOS-3 Inter-laboratory Collaboration

Year of Publication: 2012
Author: Rösch, R.
Other Authors: Tanenbaum, D.M., Jorgensen, M., Seeland, M., Baerenklau, M., Hermenau, M., Voroshazi, E., Lloyd, M.T., Galagan, Y., Zimmermann, B., Würfel, U., Hösel, M., Dam, H.F., Geworgyan, S.A., Kudret, S., Maes, W., Lutsen, L., Vanderzande, D., Andriessen, R., Teran-Escobar, G., Lira-Cantu, M., Rivaton, A., Uzunoglu, G.Y., Germack, D., Andreasen, B., Madsen, M.V., Norman, K., Hoppe, H., Krebs, F.
Published at: Energy & Environmental Science, DOI:10.1039/c2ee03508a
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

The Blend Ratio Effect on the Photovoltaic Performance and Stability of Poly(3-hexylthiophene):[6,6]-phenyl-C61 Butyric Acid Methyl Ester (PCBM) and Poly(3-octylthiophene):PCBM Solar Cells

Year of Publication: 2012
Author: Tekin, E.
Other Authors: -
Published at: Solar Energy Materials and Solar Cells, 100, 174-184
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Effect of Blend Ratio on Poly(p-phenylene-ethynylene)-alt-Poly(p-phenylene-vinylene) Polymer Solar Cell

Year of Publication: 2012
Author: Tore, N.
Other Authors: Parlak, E.A., Usluer, O., Egbe, D.A.M., San, S.E., Aydoğan, P.
Published at: Solar Energy Materials and Solar Cells, 104, 39-44
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

On the Stability of a Variety of Organic Photovoltaic Devices by IPCE and In-situ IPCE Analyses - The ISOS-3 Inter-laboratory Collaboration

Year of Publication: 2012
Author: Lira-Cantu, M.
Other Authors: Teran-Escobar, G., Tanenbaum, D.M., Voroshazi, E., Hermenau, M., Norrman, K., Lloyd, M.T., Galagan, Y., Zimmermann, B., Hösel, M., Dam, H.F., Jørgensen, M., Gevorgyan, S., Lutsen, L., Vanderzande, D., Würfel, U., Andriessen, R., Rösch, R., Hoppe, H., Rivaton, A., Uzunoglu, G.Y., Germack, D., Andreasen, B., Madsen, M.V., Bundgaard, E., Krebs, F.C.
Published at: Physical Chemistry Chemical Physics, DOI:10.1039/C2CP40821J
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Excess Current/Capacitance Observation on Polymer-Fullerene Bulk Heterojunction, Studied Through I-V and C/G-V Measurements

Year of Publication: 2012
Author: Aydogan, P.
Other Authors: Menda, D., Parlak, E.A., Özdemir, O., Kutlu, K.
Published at: Solar Energy Materials and Solar Cells, 103, 199-204
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Enhancing effects of nanoparticles on polymer_OLED performances

Year of Publication: 2012
Author: Mucur, S.P.
Other Authors: Tumay, T.A., San, S.E., Tekin, E.
Published at: J. Nanopart. Res., 14:1214
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Efficiency improvement of PCDTBT solar cells with silver nanoparticles

Year of Publication: 2013
Author: Alturk Parlak, E.
Other Authors: Tumay, T.A., Töre, N., Sarıoğlan, Ş., Kavak, P., Türksoy, F.
Published at: Solar Energy Materials & Solar Cells, 110, 58-62
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Structural Characterization of intrinsic a-Si:H thin Film for Silicon Heterojunction solar Cell

Year of Publication: 2013
Author: Pehlivan, Ö.
Other Authors: Yilmaz, O., Kodolbas, A.O., Tomak, M.
Published at: Journal of Optoelectronics and Advanced Materials, 15(1-2), 22-24
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Amplified quenching of conjugated polymer nanoparticle photoluminescence for robust measurement of exciton diffusion length

Year of Publication: 2013
Author: Bjorgaard, J.A.
Other Authors: Köse, M.E.
Published at: Journal of Applied Physics, 113, 203707
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Theoretical Study of Torsional Disorder in Poly(3-alkylthiophene) Single Chains

Year of Publication: 2013
Author: Bjorgaard, J.A.
Other Authors: Köse, M.E.
Published at: Journal of Physical Chemistry A, 117, 3869-3876
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Effective Solubilization of Single-Walled Carbon Nanotubes in THF Using PEGylated Corannulene Dispersant

Year of Publication: 2013
Author: Yilmaz, B.
Other Authors: Bjorgaard, J., Colbert, C.L., Siegel, J.S., Köse, M.E.
Published at: ACS Applied Materials & Interfaces, 5, 3500-3503
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Influences on the white emission and stability of single layer electroluminescent devices

Year of Publication: 2013
Author: Tekin, E.
Published at: Journal of Luminescence, 144, 69-73
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Intramolecular Triplet Energy Transfer in Anthracene-based Platinum Acetylide Oligomers

Year of Publication: 2013
Author: Li, Y.
Other Authors: Köse, M.E., Schanze, K.S.
Published at: Journal of Physical Chemistry
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Silica Nanoparticles for Enhanced Carrier Transport in Polymer-Based Short Channel Transistors

Year of Publication: 2013
Author: Tunc, A.V.
Other Authors: Giordano, A.N., Ecker, B., Da Como, E., Lear, B.J., Haouff, E. von
Published at: Journal of Physical Chemistry C, 117, 22613-22618
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

A series of new luminogenic molecules with the tetraphenylethene core having excellent aggregation induced emission properties

Year of Publication: 2013
Author: Odabas, S.
Other Authors: Tekin, E., Turksoy, F., Tanyeli, C.
Published at: Journal of Materials Chemistry C, 1, 7081-7091
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Highly efficient non-doped blue organic light emitting devices based on anthracene-pyridine derivatives

Year of Publication: 2013
Author: Haykir, G.
Other Authors: Tekin, E., Atalar, T., Türksoy, F.
Published at: Thin Solid Films, 548, 171-177
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Synthesis, Photophysical and Electroluminescence Properties of Anthracene-Based Green-Emitting Conjugated Polymers

Year of Publication: 2014
Author: Kimyonok, A.
Other Authors: Tekin, E., Haykir, G., Turksoy, F.
Published at: Journal of Luminescence, 146, 186-192
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Enhancing the device performance of a blue light-emitting copolymer using CdSe/ZnS quantum dots

Year of Publication: 2014
Author: Mucur, S.P.
Other Authors: Lenkeit, D., Kanelidis, I., San, S.E., Holder, E., Tekin, E.
Published at: Journal of Polymer Science Part B: Polymer Physics, 52, 147-156
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Fluorene-Dithienothiophene-S,S-dioxide Copolymers. Fine-Tuning for OLED Applications

Year of Publication: 2013
Author: Osken, I.
Other Authors: Gundogan, A.S., Tekin, E., Eroglu, M.S., Ozturk, T.
Published at: Macromolecules, DOI: 10.1021/ma4016592
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

An efficient organic inverted solar cell with AnE-PVstat:PCBM active layer and V₂O₅/Al anode layer

Year of Publication: 2014
Author: Töre, N.
Other Authors: Kosemen, A., Parlak, E.A., Alpaslan, Z., Ulbrich, C., Egbe, D., Yerli, Y., San, S.E.
Published at: Solar Energy, 99, 88-94
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Round robin performance testing of organic photovoltaic devices

Year of Publication: 2014
Author: Gevorgyan, S.A.
Other Authors: Zubillaga, O., Seoane, J., Machado, M., Parlak, E.A., Töre, N., Voroshazi, E., et al.
Published at: Renewable Energy, 63, 376-387
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Airbone Microbial Contamination Assessment of the Potential Risks in Solid Recovered Fuel Plants: A Case Study in Istanbul

Year of Publication: 2013
Author: Yildiz, S.
Other Authors: Enç, V., Kara, M., Tabak, Y., Acet, E.
Published at: Environmental Engineering and Management Journal (accepted paper)
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Fretting Behaviour of 316L Stainless Steel Produced by Powder Injection Molding

Year of Publication: 2012
Author: Minister, H.I.
Other Authors: Celiss, J.P.
Published at: Kovove Mater., 50, 33
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Neutron diffraction and observation of superconductivity for tungsten borides

Year of Publication: 2012
Author: Kayhan, M.
Other Authors: Hildebrandt, E., Frotscher, M., Senyshyn, A., et al.
Published at: Solid State Sciences, 14(11-12), 1656-1659
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Improvement Of The Magnetic Properties Of Highly Porous Open-Celled Magnets

Year of Publication: 2011
Author: Topal, U.
Other Authors: Minister, H.I.
Published at: Journal of European Ceramic Society, 31, 783
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Development of RDF for Cement Factories in Turkey

Year of Publication: 2011
Author: Kara, M.
Other Authors: Günay, E., Tabak, Y., Yıldız, Ş., Enç, V.
Published at: Combustion Science and Technology, 183, 203-219
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Istanbul's Garbage Turns into Additional Fuel in Cement Kilns

Year of Publication: 2009
Author: Kara, M.
Other Authors: Gunay, E., Tabak, Y., Yildiz, S.
Published at: Journal of Science and Technology, Year: 42, Issue: 499, pp.68-71
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Evolution of Magnetic and Structural Properties of TiO₂ with Co-Doping

Year of Publication: 2008
Author: Topal, U.
Other Authors: Ozkan, H., Bakan, H.I., et al.
Published at: Journal of Non-Crystalline Solids, 354, 1678-1682
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Injection Molding of Alumina with a Partially Water Soluble Binder System and Solvent Debinding Kinetics

Year of Publication: 2007
Author: Minister, H.I.
Published at: Materials Science and Technology, 23(7), 787
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

A Novel Leaching and Sintering Process for Manufacturing Highly Porous Stainless Steel

Year of Publication: 2006
Author: Minister, H.I.
Published at: Scripta Materialia, 55, 203-206
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Space Charge Limited Conduction and Determination of Density of Localized States in Semiconductor Cobalt Doped TiO₂

Year of Publication: 2006
Author: Okutan, M.
Other Authors: Yakuphanoglu, F., Bakan, H.I., Inanir, F.
Published at: Materials Science and Technology, 21(11), 123-126
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Solvent Debinding Kinetics And Sintered Properties of Injection Molded 316L Stainless Steel Powder

Year of Publication: 2005
Author: Eroglu, S.
Other Authors: Minister, H.I.
Published at: Powder Metallurgy, 48(4), 329-332
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Variable Range Hopping Conduction and Microstructure Properties of Semiconducting Co-Doped TiO₂

Year of Publication: 2005
Author: Okutan, M.
Other Authors: Bakan, H.I., Korkmaz, K., Yakuphanoglu, F.
Published at: Physica B, 355, 176-181
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Thermodynamic Analysis of Mo₂C Powder Synthesis by Chemical Vapor Reaction Method

Year of Publication: 2004
Author: Eroglu, S.
Other Authors: Minister, H.I.
Published at: Key Engineering Materials, 264-268, 121-124
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Development of Water Soluble Binder Systems for Low Pressure Injection Molding of Alumina

Year of Publication: 2004
Author: Minister, H.I.
Other Authors: Gunes, M.
Published at: Key Engineering Materials, 264-268, 313-316
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Wear Behaviour of SiC, Cr₃C₂ and WC Doped Alumina

Year of Publication: 2004
Author: Mindivan, H.
Other Authors: Bakan, H.I., Cimenoglu, H., Kayali, E.S.
Published at: Key Engineering Materials, 264-268, 469-472
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

The Characterization of Metal-Ceramic Interfaces in Porcelain Teeth

Year of Publication: 2004
Author: Boyraz, T.
Other Authors: Kilic, A., Ertuğ, B., Tavsanoglu, T., Karakas, Y., Addemir, O.
Published at: Key Engineering Materials, 264-268, 683-686
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Effect of Oxygen Content and Stearate Additives on Sintering Characteristics of Cu-25Cr Composite

Year of Publication: 2003
Author: Minister, H.I.
Other Authors: Kayali, E.S.
Published at: Powder Metallurgy, 46(3), 259-264
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

The Effect of Nickel Boride and Boron Additions on the Sintering Characteristics of Injection Molded 316L Powder Using Water Soluble Binder System

Year of Publication: 2001
Author: Minister, H.I.
Other Authors: Heaney, D., German, R.M.
Published at: Powder Metallurgy, 44(3), 235
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Study of Processing Parameters for MIM Feedstock Based on Composite PEG-PMMA Binder

Year of Publication: 1998
Author: Minister, H.I.
Other Authors: Jumadi, Y., Messer, P.F., Davies, H., Ellis, B.
Published at: Powder Metallurgy, 41(4), 119-121
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Evolution of Grain Structure Across Joints in Friction Stir Welded EN AW 5083 H111 Plates During Thermal Exposure

Year of Publication: 2013
Author: Birol, Y.
Published at: Materials Science and Technology, DOI: 10.1179/1743284713Y.0000000272
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Homogenization of EN AW 6005A for improved extrudability

Year of Publication: 2013
Author: Birol, Y.
Other Authors: –
Published at: Materials and Metallurgical Transactions A, 44, 504-511
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Effect of cooling rate on precipitation during homogenization cooling in an excess silicon AlMgSi alloy

Year of Publication: 2012
Author: Birol, Y.
Other Authors: –
Published at: Materials Characterization, 73, 37-42
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Aluminothermic reduction of B2O3 for the manufacture of Al-B alloys

Year of Publication: 2012
Author: Birol, Y.
Other Authors: –
Published at: Materials Chemistry and Physics, 136, 963-966
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Performance of Al-5Ti-1B and Al-3B grain refiners in investment casting of AlSi7Mg0.3 alloy with preheated ceramic moulds

Year of Publication: 2012
Author: Birol, Y.
Other Authors: –
Published at: International Journal of Cast Metals Research, 25(5), 296-300
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Performances of gas nitrided and AlTiN coated AISI H13 hot work tool steel in aluminum extrusion

Year of Publication: 2012
Author: Birol, Y.
Other Authors: Yuksel, B.
Published at: Surface and Coatings Technology, 207, 461-466
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Analysis of wear of a gas nitrided H13 tool steel die in aluminum extrusion

Year of Publication: 2012
Author: Birol, Y.
Other Authors: –
Published at: Engineering Failure Analysis, 26, 203-210
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Isothermal oxidation of plasma nitrided hot work tool steel at 750 C

Year of Publication: 2012
Author: Birol, Y.
Other Authors: –
Published at: Materials at High Temperatures, 29, 17-22
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Effect of chemical etching on the morphology of anodic aluminum oxides in the two-step anodization process

Year of Publication: 2012
Author: Erdogan, P.
Other Authors: Yuksel, B., Birol, Y.
Published at: Applied Surface Science, 258, 4544-4550
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Impact of interannealing on recrystallization during final annealing of twin belt cast AlFeSi sheet

Year of Publication: 2012
Author: Birol, Y.
Other Authors: –
Published at: International Journal of Materials Research, 103, 992-997
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Age hardening of EN AW 2014 alloy extruded in the semi solid state

Year of Publication: 2012
Author: Birol, Y.
Other Authors: –
Published at: Materials Chemistry and Physics, 131, 694-697
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Interaction of grain refinement with B and modification with Sr in aluminum foundry alloys

Year of Publication: 2012
Author: Birol, Y.
Other Authors: –
Published at: Materials Science and Technology, 28, 70-76
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Response to T6 treatment of extruded and thixoformed EN AW 2014 alloys

Year of Publication: 2011
Author: Birol, Y.
Other Authors: –
Published at: Materials Science and Engineering, A528, 5636-5641
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Response to thermal cycling of duplex-coated hot work tool steels at elevated temperatures

Year of Publication: 2011
Author: Birol, Y.
Other Authors: –
Published at: Materials Science and Engineering, A528, 8402-8409
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Performance of AlTi5B1, AlTi3B3 and AlB3 master alloys in refining the grain structure of aluminum foundry alloys

Year of Publication: 2012
Author: Birol, Y.
Other Authors: –
Published at: Materials Science and Technology, 28, 481-486
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

High temperature sliding wear testing of AlTiN and AlTiON-coated tool steels

Year of Publication: 2011
Author: Birol, Y.
Other Authors: Isler, D., Urgen, M.
Published at: Metallurgical and Materials Transactions, 42, 3316-3322
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Thermal fatigue testing of plasma transfer arc Stellite coatings on hot work tool steels under steel thixoforming conditions

Year of Publication: 2011
Author: Birol, Y.
Other Authors: Kayihan, A.
Published at: Metallurgical and Materials Transactions, 42, 3277-3283
Publication Type: Article

Complex Dielectric Coefficient of Breast Phantom Prepared For Breast Cancer Detection

Year of Publication: 2013
Author: Vertiy, A.
Other Authors: Sayıntı, A., Açıkalın, E., Çoban, K.
Published at: Physica Polonica Acta A, 2, 123
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Preparation of Linear Waterborne Polyurethane Nanocomposites and Effect of Clay on UV Degradation

Year of Publication: 2012
Author: Açıkalın, E.
Other Authors: Shooter, O.
Published at: Polyurethane Magazine International, Issue 5, 324-328
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Application of Ketone-Based Resins as Anticorrosive Coating

Year of Publication: 2011
Author: Sezer, E.
Other Authors: Kizilcan, N., Coban, K.
Published at: International Journal of Electrochemistry, Volume 2011, Article ID 253404, 9 pages
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Inhibition of the corrosion of Stainless steel by poly-N-vinylimidazole and N-vinylimidazole

Year of Publication: 2011
Author: Öncül, A.
Other Authors: Çoban, K., Sezer, E., Şenkal, B.F.
Published at: Progress in Organic Coatings, 71, 167-172
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Corrosion Inhibition Effect of 4-(2-Diethylamino-Ethylsulfonyl)-Phthalonitrile and 4, 5-Bis(Hexylsulfonyl)-Phthalonitrile

Year of Publication: 2011
Author: Sezer, E.
Other Authors: Ustamehmetoğlu, B., Bayır, Z.A., Çoban, K., Kalkan, A.
Published at: International Journal of Electrochemistry, Volume 2011, Article ID 235360, 5 pages
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Intramolecular Crosslinking of Polymers by Using Difunctional Acetylenes via Click Chemistry

Year of Publication: 2011
Author: Cengiz, H.
Other Authors: Aydogan, B., Ates, S., Açıkalin, E., Yagci, Y.
Published at: Designed Monomers and Polymers, 14, 69-78
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

The Effect of B2O3 Addition to the Microstructure and Magnetic Properties of Ni0.4Zn0.6Fe2O4 Ferrite

Year of Publication: 2008
Author: Yuksel, B.
Other Authors: Kırtay, S., Özkan, T.O., Açıkalın, E., Erkalfa, H.
Published at: Journal of Magnetism and Magnetic Materials, 320, 714-718
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

The possibility of using remote sensing technology of lidars for monitoring ecosystem health by detecting habitat condition

Year of Publication: 2013
Author: M. F. Huseyinoglu
Other Authors: S. R. Allakhverdiev, Z. Salaeva, A. Secgin, K. R. Allakhverdiev
Published at: Proc. of SPIE Vol. 8677, 2013
Publication Type: Conference Proceedings
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Preliminary Results from the New Multiwavelength Aerosol Lidar Scanning System

Year of Publication: 2013
Author: M. F. Huseyinoglu
Other Authors: Z. Salaeva, A. Secgin, K. R. Allakhverdiev
Published at: Proc. of SPIE Vol. 8677, 2013
Publication Type: Conference Proceedings
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Linear estimation of particle bulk parameters from multi-wavelength lidar measurements

Year of Publication: 2012
Author: Veselovskii, O.
Other Authors: Dubovik, A., Kalgotin, M., Korenskiy, M., Whiteman, D.N., Allakhverdiev, K.R., Huseyinoglu, M.F.
Published at: Atmos. Meas. Tech., 5, 1135-1145
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Optical properties and vertical extension of aged ash layers over the Eastern Mediterranean as observed by Raman lidars during the Eyjafjallajökull eruption in May 2010

Year of Publication: 2012
Author: Papayannis, R.
Other Authors: Mamouri, E., Kokkalis, P., Amiridis, V., Kristiansen, N.I., Stohl, A., Balis, D., Giannakaki, E., Nicolae, D., Tsaknakis, G., Belegante, L., Nemuc, A., Veselovskii, I., Korenskiy, M., Allakhverdiev, K.R., Huseyinoglu, M.F., Baykara, T.
Published at: Atmos. Env., 48, 56-65
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Preliminary Results from the New Multiwavelength Aerosol LIDAR in Turkey

Year of Publication: 2009
Author: Allakhverdiev, K.R.
Other Authors: Baykara, T.K., Bekbolet, M., Huseyinoglu, M.F., Ozbek, S., Salaeva, Z., Secgin, A., Vartapetov, S., Veselovskii, I., Korenskiy, M.
Published at: Fizika, 16, 22-25
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Compact Raman (CLS) Spectrometer for Active Testing of Liquids and Solid Samples

Year of Publication: 2009
Author: Allakhverdiev, K.R.
Other Authors: Baykara, T.K., Secgin, A., Ozbek, S., Ulubey, A.M., Salaeva, Z., Huseyinoglu, M.F., Druzhinin, S.L., Konovalov, K.A., Shchagin, V.Y., Smirnov, O.N., Strakhov, S.Yu., Perkina, E.V.
Published at: Fizika, 16, 46-50
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Fabrication of gold patterns via multilayer transfer printing and electroless plating

Year of Publication: 2012
Author: Basarir, F.
Other Authors:
Published at: ACS Applied Materials and Interfaces, 4, 1324-1329
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Morphologically controlled synthesis of flower shaped ZnO crystals with hexagonal rods and thick petals by hydrothermal method

Year of Publication: 2013
Author: Hunter, G.G.
Other Authors: Koyuncu, C.Z.
Published at: Materials Letters
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Corrosion Protection of Steel Surfaces via Sol-Gel Coatings

Year of Publication: 2004
Author: Hunter, G.G.
Other Authors: Ebony, D.
Published at: Key Engineering Materials, V.264-268, 387-390
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Processing and Characterization of Micro-filtration Supports Prepared from Alumina Powders

Year of Publication: 1996
Author: Hunter, G.G.
Other Authors: Mısırlı, Z., Gunay, V.
Published at: Ceramics International, 22, 42-45
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Synthesis of Poly(Butyl Acrylate-Co-Methyl Methacrylate)/Montmorillonite Waterborne Nanocomposite via Semi-Batch Emulsion Polymerization

Year of Publication: 2015
Author: Patriot, A.
Other Authors: Inan, T.Y., Dogan, H., Sirkecioglu, A.
Published at: Journal of Applied Polymer Science, Volume 132, Issue 32, August 20, 2015
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Development of Warm Mix Asphalt Additives Production Technologies

Year of Publication: 2015
Author: Koroglu, H.J.
Other Authors: Demir, B., Öz, H., Temel, S., Ateş, M., Sağlık, A.
Published at: Yol Magazine, 32, 6, January-February 2015, 46-78
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Novel Axially Carborane-Cage Substituted Silicon Phthalocyanine Photosensitizer; Synthesis, Characterization and Photophysicochemical Properties

Year of Publication: 2015
Author: Yasha Atmaca, G.
Other Authors: Dizman, C., Eren, T., Erdoğmuş, A.
Published at: Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, Volume 137, 244-249
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Optimization of the Particle Size Distribution of Magnetic Latent Fingerprint Powders for Porous Surface Applications

Year of Publication: 2015
Author: Gürbüz, S.
Other Authors: Ozmen Monkul, B., Ipeksac, T., Gurtekin Seden, M., Erol, M.
Published at: Journal of Forensic Sciences, 60(3), 727-736
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

UV Curable Lens Production Using Molecular Weight Controlled PEEK Based Acrylic Oligomer (Ac-PEEK)

Year of Publication: 2014
Author: Inan, T.Y.
Other Authors: Yildiz, E., Karaca, B., Dogan, H., Vatansever, A., Nalbant, M., Eken, K.
Published at: Journal of Materials Science: Materials in Medicine, 25(8), 2027-2039
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Synthesis and Fuel Cell Characterization of Blend Membranes from Phenyl Phosphine Oxide Containing Fluorinated Novel Polymers

Year of Publication: 2014
Author: Gurtekin Seden, M.
Other Authors: Basturk, E., Inan, T.Y., Kayaman Apohan, N., Gungor, A.
Published at: Journal of Power Sources, 271, 465-479
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Electrochemical Production of Boric Acid

Year of Publication: 2014
Author: Elbeyli, I.Y.
Other Authors: Turan, A., Kalafatoglu, I.E.
Published at: Journal of Chemical Technology and Biotechnology, In Press
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Characterization of Waste Oils in Air-Breathing Jet Turbine Engine

Year of Publication: 2014
Author: Pelitli, V.
Other Authors: Doğan, Ö., Köroğlu, H.J.
Published at: Journal of Engineering and Natural Science, Sigma 32, 82-95
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Ternary phase diagrams of CdSO4-NiSO4-H2O at 40 °C and 80 °C

Year of Publication: 2014
Author: Ozdogan, E.
Other Authors: Andak, B., Bulutçu, N., Türdü, S., Tatlıer, M.
Published at: Fluid Phase Equilibria, 381, 67-70
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Pararosaniline and crystal violet tagged montmorillonite for latent fingerprint investigation

Year of Publication: 2014
Author: Saroglan, S.
Other Authors: Gürbüz, S., İpeksaç, T., Gürtekin, M., Erol, M.
Published at: Applied Clay Science, 87, 235-244
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Synthesis, Photophysical and Electroluminescence Properties of Anthracene-based Green-emitting Conjugated Polymers

Year of Publication: 2014
Author: Kimyonok, A.
Other Authors: Tekin, E., Haykır, G., Türksoy, F.
Published at: Journal of Luminescence, 146, 186-192
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Highly Efficient Non-doped Blue Organic Light Emitting Devices Based on Anthracene-pyridine Derivatives

Year of Publication: 2013
Author: Haykir, G.
Other Authors: Tekin, E., Atalar, T., Türksoy, F.
Published at: Thin Solid Films, 548, 171-177
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Ultrahigh Efficiency Fluorescent Single and Bi-layer Organic Light Emitting Diodes: The Key Role of Triplet Fusion

Year of Publication: 2013
Author: Chiang, J.
Other Authors: Kimyonok, A., Etherington, M.K., Griffiths, G.C., Jankus, V., Turksoy, F., Monkman, A.P.
Published at: Advanced Functional Materials, 23, 739-746
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Synthesis of Polysulfone-b-polystyrene Block Copolymers by Mechanistic Transformation from Condensation Polymerization to Free Radical Polymerization

Year of Publication: 2013
Author: Dizman, C.
Other Authors: Kahveci, M., Yagci, Y.
Published at: Polymer Bulletin, 70(7), 2097-2109
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Recent Advances in the Preparation of Functionalized Polysulfones

Year of Publication: 2013
Author: Dizman, C.
Other Authors: Tasdelen, M.A., Yagci, Y.
Published at: Polym. Int., 62, 991-1007
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Synthesis and Characterization of Polysulfone/POSS Hybrid Networks by Photoinduced Crosslinking Polymerization

Year of Publication: 2013
Author: Dizman, C.
Other Authors: Uyar, T., Tasdelen, M.A., Yagci, Y.
Published at: Macromol. Mater. Eng., 298, 1117-1123
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Flame Retardant UV-Curable Acrylated Epoxidized Soybean Oil Based Organic-Inorganic Hybrid Coating

Year of Publication: 2013
Author: Basturk, E.
Other Authors: Inan, T.Y., Gungor, A.
Published at: Progress in Organic Coatings, 76, 985-992
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Sulfonated Carbon Black Based Composite Membranes for Fuel Cell Applications

Year of Publication: 2013
Author: Dogan, H.
Other Authors: Yildiz, E., Kaya, M., Inan, T.
Published at: Bulletin of Material Science, Vol: 36, 4, 563-573
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Inexpensive and Valuable: A Series of New Luminogenic Molecules with Tetraphenylethene Core Having Excellent Aggregation Induced Emission Properties

Year of Publication: 2013
Author: Odabas, S.
Other Authors: Tekin, E., Türksoy, F., Tanyeli, C.
Published at: Journal of Material Chemistry C, 1, 7081-7091
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Concise Total Syntheses of (±)-Noruleine and (±)-Uleine

Year of Publication: 2013
Author: Patir, S.
Other Authors: Erturk, E.
Published at: Organic and Biomolecular Chemistry, 11, 2804
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Recovery of Palladium from Spent Activated Carbon Supported-Palladium Catalyst

Year of Publication: 2013
Author: Saroglan, S.
Published at: Platinum Metals Review, 57, (4), 289-296
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

PVdF-HFP Membranes for Fuel Cell Applications: Effects of Doping Agents and Coating on the Membrane's Properties

Year of Publication: 2013
Author: Inan, T.Y.
Other Authors: Dogan, H., Gungor, A.
Published at: Ionics, DOI: 10.1007/211581-012-0803-
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Synthesis and Characterizations of Polybenzoxazines from Renewable Source of Coal Based Products via Microwave and Conventional Heat Treatments

Year of Publication: 2013
Author: Inan, T.Y.
Other Authors: Karaca, B., Dogan, H.
Published at: Journal of Applied Polymer Science, DOI: 10.1002/APP.38395
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Membrane Electrolysis of Borax Pentahydrate (Na₂B₄O₇.5H₂O)

Year of Publication: 2012
Author: Turan, A.Z.
Other Authors: Elbeyli, I.Y., Kalafatoglu, I.E.
Published at: J. Electrochem. Soc., 159 (9): E149-E153
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Regioselective Ring-Opening of Epoxides with ortho-Lithioanisoles Catalyzed by BF₃.OEt₂

Year of Publication: 2012
Author: Erturk, E.
Other Authors: Tezeren, M.A., Atalar, T., Tilki, T.
Published at: Tetrahedron, 68, 6463
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Polymerization of Epoxides Catalyzed by a Mixed-Valent Iron Trifluoroacetate [Fe₃O(O₂CCF₃)₆(H₂O)₃]

Year of Publication: 2012
Author: Erturk, E.
Other Authors: Tezeren, M.A., Tilki, T., Erdogan, T., Gören, A.C.
Published at: Polymer International, 61, 795
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Pervaporation of Ethanol/Water Mixtures Using Clinoptilolite and 4A Filled Sodium Alginate Membranes

Year of Publication: 2012
Author: Nigiz, F. U.
Other Authors: Dogan, H., Durmaz Hilmioğlu, N.
Published at: Desalination, 300, 24-31
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Preparation and Characterization of Calcium Alginate Based Composite Adsorbents for the Removal of Cd, Hg and Pb Ions from Aqueous Solution

Year of Publication: 2012
Author: Nigiz, F. U.
Other Authors: Dogan, H., Durmaz Hilmioğlu, N.
Published at: Desalination, 300, 24-31
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Preparation and Characterization of Calcium Alginate Based Composite Adsorbents for the Removal of Cd, Hg and Pb Ions from Aqueous Solution

Year of Publication: 2012
Author: Dogan, H.
Published at: Toxicological & Environmental Chemistry, 94, 3, 482-499
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Waste Mineral Oil Monitoring System in Turkey

Year of Publication: 2012
Author: Koroglu, J.
Other Authors: Erpek, E., Gokgun, H.
Published at: Chemical Forum Chemical Industry Magazine, pages 6-14
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Influence of Polyelectrolytes on Crystallization of Zeolite Y

Year of Publication: 2012
Author: Koroglu, H.J.
Other Authors: Oz, P.H., Bulutçu, A.N.
Published at: Journal of Crystal Growth, 355, pp. 8-12
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

A Comparison Study on Conductive Poly(3,4-ethylenedioxythiophene) Nanocomposites Synthesized with Clay Type Montmorillonite and Organophilic Montmorillonite

Year of Publication: 2012
Author: Saroglan, S.
Published at: Particulate Science and Technology, 30: 68-80
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

The Performance of Nafion®424 in the Membrane Electrolysis of Borax Solution

Year of Publication: 2012
Author: Turan, A.Z.
Other Authors: Elbeyli, I.Y., Bahar, T., Kalafatoglu, I.E.
Published at: Journal of Industrial and Engineering Chemistry, 18 (3), 1102-1106
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Photochemically Prepared Polysulfone/Poly (Ethylene Glycol) Amphiphilic Networks and Their Biomolecule Adsorption Properties

Year of Publication: 2011
Author: Dizman, C.
Other Authors: Demirkol, D.O., Ates, S., Torun, L., Sakarya, S., Timur, S., Yagci, Y.
Published at: Colloids and Surfaces B: Biointerfaces, 88, 1, 265-270
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Polysulfone/Metal Nanocomposites by Simultaneous Photoinduced Crosslinking and Redox Reaction

Year of Publication: 2011
Author: Sangermano, M.
Other Authors: Roppolo, I., Camara, V. H. A., Dizman, C., Ates, S., Torun, L., Yagci, Y.
Published at: Macromolecular Materials and Engineering, 296
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

An Entry to the Azocino[4,3-b]indole Framework through a Dehydrogenative Activation of 1,2,3,4-Tetrahydrocarbazoles Mediated by DDQ: Formal Synthesis of (±)-Uleine

Year of Publication: 2011
Author: Patir, S.
Other Authors: Erturk, E.
Published at: The Journal of Organic Chemistry, 76, 335
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Synthesis, Characterization and Thermally Activated Curing of Polysulfones with Benzoxazine End Groups

Year of Publication: 2011
Author: Ates, S.
Other Authors: Dizman, C., Aydogan, B., Kiskan, B., Torun, L., Yagci, Y.
Published at: Polymer, 52 (7), 1504-1509
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Role of Post-Sulfonation of Poly(ether ether sulfone) in Proton Conductivity and Chemical Stability of its Proton Exchange Membranes for Fuel Cell

Year of Publication: 2010
Author: Unveren, E.
Other Authors: Erdogan, T., Celebi, S.S., Inan, T.Y.
Published at: International Journal of Hydrogen Energy, 35, 3736-3744
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Efficient Rearrangement of Epoxides Catalyzed by a Mixed-Valent Iron Trifluoroacetate [Fe₃O(O₂CCF₃)₆(H₂O)₃]

Year of Publication: 2010
Author: Erturk, E.
Other Authors: Gollu, M., Demir, A.S.
Published at: Tetrahedron, 66, 2373
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Zeolite-filled Regenerated Cellulose Membranes for Pervaporative Dehydration of Glycerol

Year of Publication: 2010
Author: Dogan, H.
Other Authors: Durmaz Hilmioğlu, N.
Published at: Vacuum, 84, 1123-1132
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Chitosan Coated Zeolite Filled Regenerated Cellulose Membrane for Dehydration of Ethylene Glycol/Water Mixtures by Pervaporation

Year of Publication: 2010
Author: Dogan, H.
Other Authors: Durmaz Hilmioğlu, N.
Published at: Desalination, 258, 120-127
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

TUBITAK Marmara Research Center (MAM) Institute of Chemistry Establishment of Waste Mineral Oil Control and Monitoring System Project

Year of Publication: 2010
Author: Koroglu, H.J.
Published at: Chemical Forum Chemical Industry Magazine, Year: 9, Issue: 27, page: 5-9
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Some Properties of Thermal Muds of Some Spas in Turkey

Year of Publication: 2010
Author: Karakaya, M. Çelik
Other Authors: Karakaya, N., Sarıoğlan, Ş., Koral, M.
Published at: Applied Clay Science, 48, 531-537
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Relationship Between Organic Matter, Sulphur and Phosphate in the Upper Cretaceous Marine Carbonates (Karabogaz Formation, SE Turkey): Implications for Early Oil Generation

Year of Publication: 2010
Author: Inan, S.
Other Authors: Ugur, F.A., Inan, T.Y., Yalcin, M.N., Mann, U.
Published at: Journal of Petroleum Geology, vol. 33, issue 4, pg. 319-337
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Acid Activation and Bleaching Performance of Turkish (Somas) Bentonite in the Crude Soybean Oil

Year of Publication: 2010
Author: Saroglan, S.
Other Authors: Yuzer, H., Koral, M.
Published at: Particulate Science and Technology, 28: 4, 298 - 308
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

The Reaction of N3P3Cl4[NH(CH2)3NMe] with Difunctional Fluoro Alcohols

Year of Publication: 2009
Author: Tanrıverdi, E.
Other Authors: Kilic, A., Harbeck, S., Yenilmez Ciftci, G.
Published at: Heterocycles, 78(9), 2277-2286
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Dissolution of Cellulose with NMMO by Microwave Heating

Year of Publication: 2009
Author: Dogan, H.
Other Authors: Durmaz Hilmioğlu, N.
Published at: Carbohydrate Polymers, 75, 90-94
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Ag/Zn Zeolite Containing Antibacterial Coating for Food Packaging Substrates

Year of Publication: 2009
Author: Dogan, H.
Other Authors: Koral, M., Inan, T.
Published at: Journal of Plastic Film and Sheeting, V. 25, 207-220
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

UV Curable Sulfonated Hybrid Materials and Their Performance as Proton Exchange Membranes

Year of Publication: 2009
Author: Gurtekin, M.
Other Authors: Kayaman Apohan, N., Menceloglu, Y., Gungor, A.
Published at: Reactive and Functional Polymers, 69, 698
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Novel Amine Terminated Elastomeric Oligomers and Their Effects on Properties of Epoxy Resins as a Toughener

Year of Publication: 2009
Author: Ozarslan, O.
Other Authors: Yildiz, E., Inanc, T.Y., Kuyulu, A., Gungor, A.
Published at: Journal of Applied Polymer Science, Vol. 115, 37-45
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Well-defined Block Copolymer Ionomers and Their Blend Membranes for Proton Exchange Membrane Fuel Cell

Year of Publication: 2009
Author: Erdogan, T.
Other Authors: Unveren, E.E., Inan, T.Y., Birkan, B.
Published at: Journal of Membrane Science, 344, 172-181
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Concanavaline A Attached Poly(p-Chloromethylstyrene) Beads for Glycoenzyme Separation

Year of Publication: 2004
Author: Spring, T.
Other Authors: Tuncel, A.
Published at: Journal of Applied Polymer Science, Vol. 92, 2116-2124
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Characterization of Yeast Invertase Purified By Concanavaline A Immobilized Poly(p-chloromethylstyrene) Beads

Year of Publication: 2004
Author: Spring, T.
Other Authors: Tuncel, A.
Published at: Reactive and Functional Polymers, 61, 203-210
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Sodium Perborate Monohydrate Production in Fluidized Bed

Year of Publication: 2003
Author: Koroglu, H.J.
Other Authors: Kocakuşak, S., Akçay, K., Tolun, R.
Published at: Journal of Institute of Science and Technology of Balıkesir University, Volume 5, Issue 1, 91-98
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Polymerization of Epoxides Catalyzed by a Mixed-Valent Iron Trifluoroacetate [Fe3O(O2CCF3)6(H2O)3]

Year of Publication: 2002
Author: Erturk, E.
Other Authors: Tezeren, M.A., Tilki, T., Erdogan, T., Gören, A.C.
Published at: Polymer International, 61, 795
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Immobilization of Invertase onto Crosslinked-Poly(p-chloromethylstyrene) Beads

Year of Publication: 2002
Author: Spring, T.
Other Authors: Tuncel, A.
Published at: Journal of Applied Polymer Science, 83 (6), 1268-1279
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Carboxyl Carrying-Large Uniform Latex Particles

Year of Publication: 2002
Author: Tuncel, A.
Other Authors: Tuncel, M., Ergun, B., Alagöz, C., Bahar, T.
Published at: Colloid Surface A, 197 (1-3): 79-94
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Production of Anhydrous, Crystalline Borax in Fluidized Bed

Year of Publication: 1996
Author: Kocakuşak, S.
Other Authors: Akçay, K., Ayok, T., Köroğlu, H.J., Savaşçı, Ö.T., Tolun, R.
Published at: Industrial & Engineering Chemistry Research, Vol. 34, No:14, pp. 1424-1428
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Production of Anhydrous, Crystalline Boron Oxide in Fluidized Bed Reactor

Year of Publication: 1996
Author: Kocakuşak, S.
Other Authors: Ayok, T., Akçay, K., Köroğlu, H.J., Koral, M., Savaşçı, Ö.T., Tolun, R.
Published at: Chemical Engineering & Processing, Vol 35, No: 4, pp. 311-317
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Production of Anhydrous Borax Using Microwave Heating

Year of Publication: 1995
Author: Kocakuşak, S.
Other Authors: Köroğlu, H.J., Ekinci, E., Tolun, R.
Published at: Industrial & Engineering Chemistry Research, Vol. 34, No: 3, pp. 881-885
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Performance Assessment and Optimization of the PEM Water Electrolyzer by Coupled Response Surface Methodology and Finite Element Modeling

Year of Publication: 2024
Author: Özdemir, S.N.
Other Authors: Taymaz, I., Okumuş, E., San, F.G.B.
Published at: Fuel, 365, 131138
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Optimization of Operating Parameters for Boosting the Performance of the PEMEC by the Response Surface Methodology

Year of Publication: 2023
Author: Özdemir, S.N.
Other Authors: Taymaz, I., Okumuş, E., San, F.G.B., Akgün, F.
Published at: Int. J. of Green Energy, 20, 1861-1872
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

PEMEC Performance Evaluation Through Experimental Analysis of Operating Conditions by Response Surface Methodology (RSM)

Year of Publication: 2023
Author: Özdemir, S.N.
Other Authors: Taymaz, I., Okumuş, E., San, F.G.B.
Published at: European Mechanical Science, v7, 16-21
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Experimental Investigation on Performance Evaluation of PEM Electrolysis Cell by Using a Taguchi Method

Year of Publication: 2023
Author: Özdemir, S.N.
Other Authors: Taymaz, I., Okumuş, E., San, F.G.B., Akgün, F.
Published at: Fuel, 344, 128021
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Integrated Process Control-Power Management System Design and Flight Performance Tests for Fuel Cell Powered Mini-Unmanned Aerial Vehicle

Year of Publication: 2021
Author: Turk, E.
Other Authors: Sarul, M.H., Çengelci, E., İyigün Karadağ Ç., Boyacı San, F.G., Kılıç, M., Okumuş, E., Yazıcı, M.S.
Published at: Energy Technology, vol. 9, no. 3, p. 2000879
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Comparison of Hydrogen Consumption Behavior of Chromium and Manganese Promoted Copper-Based Catalysts

Year of Publication: 2021
Author: Moon, S.
Other Authors: Ozdemir, M., Melikoglu, M.
Published at: International Journal of Hydrogen Energy, 46: 29173-29182
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Effects of Magnesium and Chromium Addition on Stability, Activity and Structure of Copper-Based Methanol Synthesis Catalysts

Year of Publication: 2021
Author: Moon, S.
Other Authors: Ozdemir, M., Melikoglu, M.
Published at: International Journal of Hydrogen Energy, 46: 12857-12873
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

CVD Graphene Supported Cobalt (II) Phthalocyanine as Cathode Electrocatalyst for PEM Fuel Cells

Year of Publication: 2020
Author: Dursun, S.
Other Authors: Akay, R.G., Yazici, M.S.
Published at: International Journal of Hydrogen Energy
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Mixed Carbon-Graphene Supports for Cobalt (II) Phthalocyanine as Fuel Cell Cathode

Year of Publication: 2020
Author: Dursun, S.
Other Authors: Yazici, M.S.
Published at: ECS J. Solid State Sci. Technol. 9, 4
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Assessment of Glucose Oxidase-Based Enzymatic Fuel Cells Integrated with Newly Developed Chitosan Membranes by Electrochemical Impedance Spectroscopy

Year of Publication: 2020
Author: Spring, T.
Other Authors: Yazici, M.S.
Published at: Electroanalysis, 32, 1304-1314
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Boron Doped CVD Graphene Fabrication and Fuel Cell Performance

Year of Publication: 2019
Author: Yazici, M.S.
Other Authors: Boyaci San, F.G.
Published at: Journal of Boron, 4 (3), 141-147
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Optimization of the PEMFC Operating Parameters for Cathode in the Presence of PtCo/CVD Graphene Using Factorial Design

Year of Publication: 2019
Author: Yazici, M.S.
Other Authors: Boyaci San, F.G.
Published at: Int J Energy Res. 2019; P 4506-4519
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Performance Assessment of a Perfluorosulfonic Acid-Type Membrane (i.e. Nafion™ 115) for an Enzymatic Fuel Cell

Year of Publication: 2019
Author: Spring, T.
Other Authors: Yazici, M.S.
Published at: Electroanalysis, 31, 1656-1663
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Ultralow Pt Loading on CVD Graphene for Acid Electrolytes and PEM Fuel Cells

Year of Publication: 2018
Author: Yazici, M.S.
Other Authors: Azder, M.A., Salihoglu, O., Boyaci San, F.G.
Published at: International Journal of Hydrogen Energy, 43, 18572-18577
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

CVD Grown Graphene as Catalyst for Acid Electrolytes

Year of Publication: 2018
Author: Yazici, M.S.
Other Authors: Azder, M.A., Salihoglu, O.
Published at: International Journal of Hydrogen Energy, 43, 10710-10716
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Immobilized Glucose Oxidase Biofuel Cell Anode by MWCNTs, Ferrocene, and Polyethylenimine: Electrochemical Performance

Year of Publication: 2018
Author: Spring, T.
Other Authors: Yazici, M.S.
Published at: Asia-Pac J Chem Eng. 13, 2149
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

The Effect of Compression Molding Parameters on the Electrical and Physical Properties of Polymer Composite Bipolar Plates

Year of Publication: 2017
Author: Boyaci San, F.G.
Other Authors: Okur, O.
Published at: International Journal of Hydrogen Energy, 42, 23054-23069
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Development of Boron-Based Hydrogen and Fuel Cell System for Small Unmanned Aerial Vehicle

Year of Publication: 2017
Author: Okumus, E.
Other Authors: Boyaci San, F.G., Okur, O., Erdor Türk, B., Çengelci, E., Kılıç, M., Iyigun Karadag, Ç., Çavdar, M., Turkmen, A., Yazıcı, M.S.
Published at: International Journal of Hydrogen Energy, 42, 2691-2697
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Optimization of the Catalyst Loading for the Direct Borohydride Fuel Cell

Year of Publication: 2016
Author: Boyaci San, F.G.
Other Authors: Iyigun Karadag, Ç., Okur, O., Okumus, E.
Published at: Energy, 114: 214-224
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Investigation of Carbon Supported Nanostructured PtAu Alloy as Electrocatalyst for Direct Borohydride Fuel Cell

Year of Publication: 2015
Author: Iyigun Karadag, Ç.
Other Authors: Behmenyar, G., Boyaci San, F.G., Sener, T.
Published at: Fuel Cells, 15, No. 2, 262-269
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Optimization of the Operation Conditions in a Direct Borohydride Fuel Cell with Carbon Supported Au Anode

Year of Publication: 2014
Author: Boyaci San, F.G.
Other Authors: Okur, O., Iyigün Karadağ, Ç., Okumus, E.
Published at: Progress in Exergy, Energy, and the Environment, January, pp. 927-935
Publication Type: Book Chapter
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Evaluation of Operating Conditions on DBFC (Direct Borohydride Fuel Cell) Performance with PtRu Anode Catalyst by Response Surface Method

Year of Publication: 2014
Author: Boyaci San, F.G.
Other Authors: Okur, O., Iyigün Karadağ, Ç., Isık Gulsac, I., Okumus, E.
Published at: Energy, 71, 160-169
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Optimization of Parameters for Hot-Pressing Manufacture of Membrane Electrode Assembly for PEM (Polymer Electrolyte Membrane Fuel Cells) Fuel Cell

Year of Publication: 2013
Author: Okur, O.
Other Authors: Iyigün Karadağ, Ç., Boyaci San, F.G., Okumus, E., Behmenyar, G.
Published at: Energy, 57, 574-580
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Analysis of the Polymer Composite Bipolar Plate Properties on the Performance of PEMFC (Polymer Electrolyte Membrane Fuel Cells) by RSM (Response Surface Methodology)

Year of Publication: 2013
Author: Boyaci San, F.G.
Other Authors: Isik Gulsac, I., Okur, O.
Published at: Energy, 55, 1067-1075
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Effect of Surface Wettability of Polymer Composite Bipolar Plates on Polymer Electrolyte Membrane Fuel Cell Performances

Year of Publication: 2013
Author: Boyaci San, F.G.
Other Authors: Isik-Gulsac, I.
Published at: International Journal of Hydrogen Energy, 38(10), 4089-4098
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

A Review of Thermoplastic Composites for Bipolar Plate Applications

Year of Publication: 2013
Author: Boyaci San, F.G.
Other Authors: Tekin, G.
Published at: International Journal of Energy Research, Submitted (ER-12-2623), 16-Feb-2012
Publication Type: Review
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Investigation of Ni Foam Effect for Direct Borohydride Fuel Cell

Year of Publication: 2012
Author: Celik, C.
Other Authors: Boyaci San, F.G., Sarac, H.I.
Published at: Fuel Cells, 12(6), 1027-1031
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Application of Response Surface Methodology to Optimize and Investigate the Effects of Operating Conditions on the Performance of DMFC

Year of Publication: 2011
Author: Taymaz, I.
Other Authors: Akgun, F., Benli, M.
Published at: Energy, 36, 1155-1160
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Improving the Direct Borohydride Fuel Cell Performance with Thiourea as the Additive in the Sodium Borohydride Solution

Year of Publication: 2010
Author: Celik, C.
Other Authors: Boyaci San, F.G., Sarac, H.I.
Published at: International Journal of Hydrogen Energy, 35, 16, 8678-8682
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Influences of Sodium Borohydride Concentration on Direct Borohydride Fuel Cell Performance

Year of Publication: 2010
Author: Celik, C.
Other Authors: Boyaci San, F.G., Sarac, H.I.
Published at: Journal of Power Sources, 195, 2599-2603
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Effects of Operation Conditions on Direct Borohydride Fuel Cell Performance

Year of Publication: 2008
Author: Celik, C.
Other Authors: Boyaci San, F.G., Sarac, H.I.
Published at: Journal of Power Sources, 185, 197-201
Publication Type: Article
Vice President / Institute: Vice Presidency of Materials and Process Technologies

Quick Links

News
Career
Who We Are
Main Menu
Follow Us
Facebook Linkedin X-twitter Youtube Instagram

© 2025 TÜBİTAK MAM | All Rights Reserved.